Wastewater Aeration Solutions
-
Thermatel® TA2 Mass Flow Transmitter
11/15/2013
The Thermatel® Model TA2 thermal mass flow transmitter, based on thermal dispersion technology, provides reliable mass measurement for air and gas flow applications.
-
Sewage Pump Station Level Application
10/1/2019
The most common level application in the water and waste water industry is the infamous wet well. With its line-of-sight measurement technology, rugged sensor, narrow laser beam and virtually nonexistent maintenance requirements or on-site calibration, ABB’s LLT100 laser level transmitter answers most concerns related to wet well level measurements and makes it easy to calculate what could amount to a substantial return on investment.
-
KLa Systems Jet Aerator
10/28/2008
The high-alpha factor and clean water oxygen transfer performance of KLa’s jet aeration technology results in low energy costs and reduced off-gas volume for industrial and biosolids applications.
-
PISCES™ CFSBR Continuous Fill Sequencing Batch Reactor
11/12/2020
Parkson’s PISCES™ CFSBR combines the process benefits of cyclical treatment with the simplified operating concept of continuously filling all reactor tanks at all times.
-
Radial Jet Pod Aerators
6/18/2008
The Mass Transfer Systems radial jet pod aerators are designed with jet aeration nozzles installed around the circumference of an integral liquid / air pod body. This configuration is most applicable for smaller round and square tanks and sequence batch reactors where directional flow patterns are not desirable.
-
KLa Systems Total System Responsibility
3/17/2014
A typical system consists of the Slot Injector™ aerators, jet mixers or jet aerators complete with in-basin piping system, back-flush system, liquid recirculation pumps, and air blowers. The pumps supplied are either end suction centrifugal, submersible, or self-priming. Low pressure air is delivered by positive displacement blowers, screw compressors, multi-stage or high speed centrifugal blowers.
-
Explorer Series Disc Diffusers
6/25/2014
Our fine-pore, flexible diffusers can reduce facility energy costs by up to 40%. No matter your industry, your custom, chemically-correct solution is built to last and save you money.
-
Repair Or Rethink
8/7/2015
The Moundsville Wastewater Treatment Plant in West Virginia chooses not to fix a broken blower unit, but rather to correct an outdated approach. The result is a savings of $50-60K a year in energy costs.
-
AvN™
5/2/2019
As water resource reclamation facilities (WRRF) desire to divert more carbon towards energy generation, it becomes harder and more expensive to remove the remaining nutrients from the wastewater. This is where AvN™ comes into play as an overall process control philosophy promoting intensification.
-
Submersible Aerator Type ABS XTA/XTAK
8/2/2018
The XTA and XTAK are self-aspirating submersible aerators for wastewater and water treatment in municipal and industrial plants. The main areas of application are mixing and equalization tanks, activated sludge tanks, SBR, and sludge storage tanks.